A Comparative Review of Component Tree Computation Algorithms
Download the image dataset used in this comparison to bench the algorithms (26 Mb).
Compare the performance of the algorithms on an image of your choice and plot the performance curves.
Demo page url: http://olena.lrde.epita.fr/demos/maxtree_comparison.php
Under development. For now, you can only plot curves and show performance of the algorithms on a pre-defined dataset. Benching the algorithms on your own images is still not possible.
Some results extracted from the paper.
Figures to answer reviewers requests about:
- Parallel algorithms behaviour on a machine with more cores. It has been tested on a 12-cores (24 logical cores) machine where each processor is a Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz.
- Parallel algorithms behaviour on an AMD processor since some algorithms seem to be more efficient on those architectures. Tests have been conducted on a AMD quad-core AMD Phenom(tm) II X4 945 Processor.
You can download the archive with the source code.
The applications rely on those external libraries:
- Intel TBB
You need a c++ 11 compliant compiler (applications have been successfully built with gcc > 4.7 and icc
Building maxtree executables
> tar xjf maxtree-review.targ.bz2 && cd maxtree-review > mkdir build && cd build > cmake .. > make -C apps/maxtree_comparison
It outputs the following executables:
- maxtree_serial_hqueue: Salembier (sequential)
- maxtree_serial_pqueue: Nister (<18bits) / Wilkinson (>18 bits) (sequential)
- maxtree_serial_berger: Berger et al.
- maxtree_serial_ufind_wlc: Berger + level compression
- maxtree_serial_ufind: Berger + level compression enabled if < 18bits
- maxtree_serial_unfindrank: Berger + rank
- maxtree_serial_najman: Najman and Couprie
- maxtree_parallel_hqueue: Salembier (parallel)
- maxtree_parallel_pqueue: Nister (<18bits) / Wilkinson (>18 bits) (parallel)
- maxtree_parallel_ufind: Berger + level compression enabled if < 18bits (parallel)
- maxtree_parallel_unfindrank: Berger + rank (parallel)
- maxtree_parallel_ufind_line: Matas et al. (parallel)
The binaries are then located in apps/maxtree_comparison. For usage and available options, run appname --help where appname is the name of the maxtree algorithm.
$ ./apps/maxtree_comparison/maxtree_serial_berger --help Usage: ./apps/maxtree_comparison/maxtree_serial_berger inputfile Allowed options: --help produce help message --nthread arg (=-1) set number of thread (default: auto) --nbits arg (=8) Set number of bits (default: 8). Quantization of the original is changed. Upper bits are moved left and missing lower bits are generated at random. --ntest arg (=3) set number of runs (default: 3) --sz arg (=0) Set size (number of pixels) (0: original). Resize the image by tiling or cropping the original until matching the number of pixel required. Original ratio width/height is kept.